Chauvet led techno strobe manual

Color Temperature at full : Lighting Systems. The 4PLAY provides a ready-to-go light bar for the entertainer on the go. Important installation or configuration information. Business Profile for Chauvet Lighting. Ovation Sp cw Chauvet Professional. Read more. Videos for related products.

Limited Time. Write your review Item ID: Obey6. It can be configured for 12 or 24 channel two scene preset, 24 or 48 channel single scene with master, or 48 channel memory board operation. SKU: These units are B-Stock from Chauvet and come with a 1 year warranty.

PDF User Manual. Added UV in pars and strobes for increased color mixing and effects. All modes have adjustable fade in, fade out time. Chauvet DJ. Take a shot at delighting event guests and clients with Gobo Shot for brilliant gobo projections! EZPin Zoom features manual zoom adjustment with a wide range to accommodate fixture placement at any distance.

Disclaimer The information and specifications contained in this QRG are subject to change without notice. Since the last thing that we want is disturbing your diet with too much fat or too much sugar, you'll be glad to learn that we made them ourselves with fresh, organic and fair ingredients, and with a perfect nutritional balance.

Chauvet Lighting. I have been tasked with doing the stage lighting for our band. ShowXpress is a PC-based lighting console, and is completely free to download and test on your computer. Our passion is to make a positive difference in the world of illumination … The unit can be controlled via four DMX channels, multiple modes accessible via the control panel, or an optional LED-FS1 controller.

Document Printing For best results, print this document in color, on letter size paper 8. The bar is fitted with four LED moonflowers each containing red, green, blue and white LEDs to produce razor-sharp rotating beams. In the event of serious operating problem, stop using the unit immediately.

Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. Always use the same type spare parts. Make sure power cord is never crimped or damaged. Never disconnect power cord by pulling or tugging on the cord. Avoid direct eye exposure to lamp. There are no user serviceable parts inside the unit. Do not any repairs yourself. When replacing the lamp, please wait 15 minutes after powering down to allow the unit to cool down!

Always disconnect from main power prior to lamp replacement. Do not touch the envelope glass area of the bulb with bare hands. If this happens, clean the lamp with alcohol and wipe it with a lint free cloth before installation.

The segment display can remain attached to the PCB during lamp replacement. You may need to clip the tie-wraps that restrain the loose wires to the screw posts on the PCB in order to free the lamp. J3 J4 1. Wire molded into ceramic base is fastened to terminal labeled J4 2.

Wire coiled around the envelope of the bulb gets fastened to terminal labeled J5. J5 5 If you are replacing the lamp, you may want to log the fixture hours in order to track the lamps use.

Adjust the angle of the fixture by loosening both knobs and tilting the fixture. After finding the desired position, retighten both knobs. Safety cables should always be used. Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation.

Clamp is sold separately. Side ventilation panels allow breathing room so it is important to allow at least 12 inches of unencumbered space on both sides. Using a Color Gel The STX is equipped with a detachable clear front cover that doubles as a gel holder as illustrated below.

The size of the gel used in the illustration was a 6. If you don not press the ENTER button, it will automatically return to the main functions without any change after idling 8 seconds. To go back to the functions without any change press the MENU button.

After this initial power-up sequence, if the fixture receives no DMX signal, it will enter into a stand alone mode. Be sure to power up your DMX controller device before the lighting fixture to avoid unwanted auto mode operation. DMX control mode will provide the greatest flexibility and creativity. Each fixture trait can be controlled individually using any universal DMX controller. All models will run through their built in programs as they listen to the sound.

In this mode, the first unit in the daisy chain will automatically command all other units following. A CA-8 and CA-8F Easy controller connected to the first unit in the chain will allow enhanced simple control functions. Simply connect each fixture in a daisy like fashion using qualified 3 pin DMX cables as described below. Then, proceed to connect from the output as stated above to the input of the following fixture and so on as illustrated below.

Trusst supplies efficient, reliable trussing and related accessories giving greater creative freedom to small venues and mobile performers. Visit Site. Iluminarc offers robust, architectural lighting fixtures including linear, pod, and panel luminaires. ChamSys designs state-of-the-art lighting control and software programs for the production and touring market, as well as permanent installations.

A passion for lighting and the drive to excel unite an otherwise diverse staff in the United States, Mexico, United Kingdom, Belgium, France, and Germany. All share the realization that straightforward advice, after-sale service, and support going beyond top-of-the-line products are key to a truly satisfied customer. All Rights Reserved.